Resources
Pressure Sensor Accuracy: Watch Out for These 3 Errors
Inaccuracies in pressure instrumentation occur when the output signal deviates from the desired measuring result. When pressure readings are higher or lower than actual, you risk the performance and safety of your application. Therefore, it is important to recognize the errors – and to understand how they come about.
Using a simple analogy and easy-to-follow animation, this short video from WIKA describes the three main errors that affect pressure sensor accuracy:
Watch this video for a straightforward and accessible explanation of the main types of errors that affect pressure sensor accuracy.
Contact Valin today for more information at (855) 737-4714, or fill out our online form.
Using a simple analogy and easy-to-follow animation, this short video from WIKA describes the three main errors that affect pressure sensor accuracy:
- Zero-point error – The start of the measuring range is too high or too low (this is the zero offset), thus shifting the entire scale up or down by that zero offset value.
- Span error – The distances between the individual divisions (the span) from the zero point to the full-scale value are even but wrong, which has the effect of magnifying errors at the upper end of the scale.
- Non-linearity – The distances between the individual divisions from the zero point to the full-scale value are not even (non-linear), thus making the ideal straight line into a curve.
Watch this video for a straightforward and accessible explanation of the main types of errors that affect pressure sensor accuracy.
Contact Valin today for more information at (855) 737-4714, or fill out our online form.
A lesson for me is that I need to involve you earlier in the program.
You were tireless in your support and it will not be forgotten!